Sonore Rendu

[vortecjr]

I’m good, I have that one...thanks.

[bahringe]

I have a copy of V1.52 which is what it’s running now. I found it on the vendor site. And I will gladly keep my end of the bargain!

[vortecjr]

Would there be any benefit in updating to V1.55 ? That’s the latest firmware.

Sure you can update it to v1.55. Do you have a copy of v1.51?

[vortecjr]

Sir you are fantastic! Next time you are in NYC let me buy you a beer or 20!

thank you,
generic DLNA, original, DSD not enabled

Glad to help and I may take you up on that!

[bahringe]

Final tests
SSR115 does DSD 64, 128, 256
SR116 does DSD 64, 128, 256
thank you so much for the help.

Eric B

[bahringe]

Would there be any benefit in updating to V1.55 ? That’s the latest firmware.

[bahringe]

Sir you are fantastic! Next time you are in NYC let me buy you a beer or 20!

thank you,
generic DLNA, original, DSD not enabled

[bahringe]

Firmware in use V1.52 000 000 94CF0E93 (Mon Feb 5 19:46:30 2018)

[vortecjr]

What software version number is that Rendu on? From JRiver right click on the unit and go to its webpage.

[vortecjr]

With those settings (DSD not enabled) I get no sound and JRiver tries to send a pcm stream 172k pcm

The server will behave different with different renderers because there is a handshake and exchange of capabilities. The Rendu has no onboard DSP so if you are getting PCM then it’s coming from JRiver based on its configuration.

This should avoid any DSP at the server. In JRiver Generic DLNA/Audio/Mode select Original. Do not select bitstream and see what happens with DSD64 and DSD128. If that doesn’t work, select bitstream and retest. In both cases have volume at 100% at the server.

[bahringe]

With my same DLNA server the microR has no issues. I doubt it’s the server.

[bahringe]

With those settings (DSD not enabled) I get no sound and JRiver tries to send a pcm stream 176.4k pcm

[vortecjr]

I’m inclined to think you have a server side issue. Can you confirm your JRiver configuration as follows:
http://www.rendu.sonore.us/Sonore-JRiver-Setup-DSD.png

[bahringe]

When I play DSD 128 the DAC displays DSD 64, plays it as if a 64, on i2s inputs. If I play the same file over USB it displays DSD 128.

[vortecjr]

Also the firmware on SSR115 is 2018

There is a software firmware for bug fixes that you can change, and a hardware firmware that you can’t change.